Modules

Modules

  • 1376 - Single USB to UART converter

    1376 - Single USB to UART converter

    $40.00
    Documents:  FTDI VCP Driver / D2XX Driver Description:  This logic level serial interface is based on the FTDI FT232RL converter and allows direct connection from a PC to an embedded processor with logic level and polarity compatibility, i.e...
  • 1435 - USB to I2C master

    1435 - USB to I2C master

    $40.00
    GUI: 2.01.08 / 2.01.06 / Revision / I2C Help   Drivers:  FTDI VCP Driver / D2XX Driver   Description:  This module provides the ability to quickly test I2C slave devices by generating all of the standard master functions compiled...
  • 1441 - Quad USB to UART converter

    1441 - Quad USB to UART converter

    $45.00
    Documents:  FTDI VCP Driver / D2XX Driver Description:  Quad FT4232 based USB to logic level RS232 serial converter.  1.65V to 5.50V external interface voltage range.  Jumper select-able 3.3V or 5.0V internal interface voltage...
  • 1505 - USB to fiber optic serial interface

    1505 - USB to fiber optic serial interface

    $90.00
      Documents:  FTDI VCP Driver / D2XX Driver  Description:  USB to fiber optic serial interface using an FT232RL converter and Broadcom tranceivers. USB powered with USB-B interface connector. Full duplex operation. 115200 baud...
  • 1517 - BLE 4.0 Sniffer

    1517 - BLE 4.0 Sniffer

    $45.00
    Documents:  RN4020 Protocol / FTDI VCP Driver / D2XX Driver Description:  BLE 4.0 sniffer with FT232RL USB interface and RN4020 radio module (FW Version 1.33).
  • 1625 - USB to RS485 converter

    1625 - USB to RS485 converter

    $45.00
    Documents:  FTDI VCP Driver / D2XX Driver Description:  FT232 based USB to RS485 half duplex serial converter.  USB 1.1 and up with USB-B connector (USB cable not included).  USB bus powered, i.e. no external power required...
  • 1647 - USB isolated RS232 interface

    1647 - USB isolated RS232 interface

    $55.00
    Documents:  FTDI VCP Driver / D2XX Driver Description:  This module provides for an electrically isolated RS232 interface and is based on the FTDI FT232RL USB to serial converter connected to a MAX211 RS232 serial port driver.  Upstream...
  • 32 x 4 (128) channel I2C multiplexor

    32 x 4 (128) channel I2C multiplexor

    $500.00
    Documents: Schematic / Analog switch Description: The 1498 is a 128 channel I2C (Or analog) multiplexer that is arranged as 32 banks (1 to 32) of 4 channels (A to D) each.  The multiplexer is controlled via a USB serial interface as well as...