TRS-80 PC-2 Regulator module
- SKU:
- PC2REG
Description
OEM regulator modules for the TRS-80 PC-2 (TRS80 PC2), Sharp PC-1500 and Sharp PC-1500A pocket computers.
- Pulled from working equipment and tested good.
- Date codes and appearance may vary from pictured unit but all operate interchangeably.
- After installation: (1) Apply 6V to battery input and turn unit on. (2) Adjust left pot for 4.700V at pin 8 (VCC) and right pot for 1.000V at pin 4 (LCD contrast).
- The TES 1721 is an improved drop in regulator replacement.
Related Products
Related Products
TRS-80 PC-2 Regulator replacement module
$20.00
Regulator modules for the TRS-80 PC-2 (TRS80 PC2), Sharp PC-1500 and Sharp PC-1500A pocket computers.
Regulator factory adjusted to 4.700V +/- 10mV at VCC under full load = 75mA.
No minimum...
TRS-80 PC-2 24K RAM Expansion
$30.00
24K RAM expansion board for TRS-80 PC-2 (TRS80 PC2) and Sharp PC-1500 (Sharp PC1500) increases the memory from the standard 1850 bytes free to 26,426 bytes free.
For the Sharp PC-1500A (Sharp...
TRS-80 PC-2 60 pin connector
$30.00
Original connector used on the Sharp CE-158 serial interface as well as the the TRS-80 PC-2 printer cassette interface and the Sharp CE-150 cassette interface for the PC-1500 and PC-1500A pocket...
TRS-80 PC-2 (TRS80 PC2) Printer tape roll
$3.25
Single ply plain paper rolls to fit TRS80 PC2 pen plotter. These are 2.25" wide and rolls are 30mm in diameter with 5 yards of clear paper followed by 1.5 yards of red "End of tape marker".
TRS-80 Resources
$0.00
This page links to free copies of high quality scanned and OCR'd PDFs of manuals for the TRS-80 PC-2 and the Sharp PC-1500 pocket computers.
TRS-80 PC-2 (TRS80 PC2) Owners Manual (5A2)