BR12261 Panaplex display with connector board
- SKU:
- BR12261C
Description
Documents: BR12261 Mechanical outline / Application note
Description: These Burroughs BR12261 Panaplex displays were pulled from calculators and a connector board has been permanently affixed with conductive epoxy to translate the silver cathode and ITO anode connections to an easy to use 0.100" pitch DIP header - No metal clips needed. Display is tested after assembly for anode and cathode connectivity as well as firing voltage and current. Some displays may have slight sputtering on rightmost digits that does not affect digit-digit lighted uniformity.
Related Products
Related Products
TRS-80 PC-2 60 pin connector
$30.00
Original connector used on the Sharp CE-158 serial interface as well as the the TRS-80 PC-2 printer cassette interface and the Sharp CE-150 cassette interface for the PC-1500 and PC-1500A pocket...
1505C2 - Optical cable assembly with latching connectors
$4.00
Description: Duplex optical fiber terminated on both ends with latching connectors.
Price is per meter of cable length, 1M minimum length.
1505C1 - Optical cable assembly with snap-lock connectors
$4.00
Description: Duplex optical fiber terminated on both ends with snap lock connectors.
1404 - IN4 or IN18 nixie tube mounting board
$3.00
Description: PWB with hole pattern to accommodate IN4 or IN18 nixie tubes. Holes are sized for socket pins such as the ED5019 (Shallow) or ED90081 (Deep) pins.